Technical Support

MDS Display can provide you TFT display, Touch screen, LCD module, LCD panel and LED Backlight, below are brief introductions:

LCD（ Liquid Crystal Display ）

LCD is consisted of two ITO glass, liquid crystal and two piece polarizers, liquid crystal is between two ITO glass and both polarizers are pasted on the two ITO glass.

Below are the products we can produce：

Product type：TN/HTN/STN/FSTN and VA;

Polarizer mode：transmissive, transflective and reflective;

ITO thickness：1.1mm, 0.7mm, 0.55mm and 0.4mm;

Working temperature：0～+50℃/-20～+70℃/-30～+80℃;

Pitch of pin：2.54mm/2.0mm/1.8mm/1.5mm/1.27mm;

Maximum dimension：395mm X345mm;

Minimum pitch：10μm;

Maximum duty ：1/320DUTY;

Maximum dot matrix：640 x 320;

Voltage range：2.5V~25V。

LCM（LCD Module）

LCD module is consisted of LCD/IC/PCB/FPC/backlight etc.

Below are the products we can produce:

Product type：COG、TAB、COB、SMT、 HEATSEAL;

Working temperature：0～+50℃/-20～+70℃/-30～+80℃;

Interface：3 wire or 4 wire SPI serial port、8 or 16 bit parallel port MCU、I2C、RS232 or RS485、USB;

Display type：white background black character、yellow green background black character、blue Background black character、blue background white character、black background white character;

TFT Display and Touch Screen

TFT has very good contrast ratio and brightness, as well as fast reaction speed.

Below are the products we can produce:

Product type：mono TFT、 color TFT（TN、VA、IPS）;

Dimension：1.44 inch～10.1 inch;

Resolving power：128x128～1280x800;

Interface： 8 or 16 bit parallel port MCU、24 bit RGB、LVDS、USB;

LED Backlight

LED Backlight is a light source put behind the LCD, its lighting effect directly affects the visual effect of LCD module.

Below are the products we can produce:

Type：mainstream LED and EL、CCFL;

Color：white/blue/green/yellow green/amber/RGB;

Below are the production process of TFT display, LCD module, LCD panle and LED backlight：